paroto.systems.mixing_reactor#

Mixing reactor system: outlet velocity and temperature homogeneity.

Classes#

MixingReactorSystem

Mixing reactor system component.

Module Contents#

class paroto.systems.mixing_reactor.MixingReactorSystem(**kwargs)#

Bases: openmdao.api.Group

Mixing reactor system component.

Computes outlet velocity and temperature homogeneity index based on inlet conditions from torch.

Can accept gas property parameters as either float values or Model instances.

Parameters (in initialize)#

gas_heat_capacityfloat or Model, optional: Gas specific heat capacity (J/(kg·K)) or Model that computes it

Inputs#

inlet_velocity_proxyfloat: Inlet velocity proxy from torch (m/s)
inlet_temperature_proxyfloat: Inlet temperature proxy from torch (K)
power_to_gasfloat: Power transferred to gas (W)
mass_flowfloat: Mass flow rate (kg/s)
reactor_lengthfloat: Reactor length (m)
reactor_diameterfloat: Reactor diameter (m)
gas_heat_capacityfloat (if not provided as Model): Gas specific heat capacity (J/(kg·K))

Outputs#

outlet_velocityfloat: Outlet velocity (m/s)
temperature_homogeneity_indexfloat: Temperature homogeneity index (0-1, higher is more homogeneous)
outlet_temperaturefloat: Average outlet temperature (K)

initialize()#: Declare options for model selection.

setup()#: Set up the group with core component and optional models.

configure()#

Configure this group to assign children settings.

This method may optionally be overidden by your Group’s method.

You may only use this method to change settings on your children subsystems. This includes setting solvers in cases where you want to override the defaults.

You can assume that the full hierarchy below your level has been instantiated and has already called its own configure methods.

Available attributes:: name pathname comm options system hieararchy with attribute access

set_input_defaults(name, val=_UNDEFINED, units=None, src_shape=None)#

Specify metadata to be assumed when multiple inputs are promoted to the same name.

Parameters:

name (str) – Promoted input name.
val (object) – Value to assume for the promoted input.
units (str or None) – Units to assume for the promoted input.
src_shape (int or tuple) – Assumed shape of any connected source or higher level promoted input.

is_explicit(is_comp=True)#

Return True if this Group contains only explicit systems and has no cycles.

Parameters:: is_comp (bool) – If True, return True if this is an explicit component. If False, return True if this is an explicit component or group.
Returns:: True if this is an explicit component.
Return type:: bool

set_initial_values()#: Set all input and output variables to their declared initial values.

get_indep_vars(local, include_discrete=False)#

Return a dict of independant variables contained in this group or any of its subgroups.

Parameters:

local (bool) – If True, return only the variables local to the current process.
include_discrete (bool) – If True, include discrete variables in the returned dict.

Returns:

Dict of all independant variables in this group and their corresponding metadata.

Return type:

dict

promotes(subsys_name, any=None, inputs=None, outputs=None, src_indices=None, flat_src_indices=None, src_shape=None)#

Promote a variable in the model tree.

Parameters:

subsys_name (str) – The name of the child subsystem whose inputs/outputs are being promoted.
any (Sequence of str or tuple) – A Sequence of variable names (or tuples) to be promoted, regardless of if they are inputs or outputs. This is equivalent to the items passed via the promotes= argument to add_subsystem. If given as a tuple, we use the “promote as” standard of “(‘real name’, ‘promoted name’)*[]:”.
inputs (Sequence of str or tuple) – A Sequence of input names (or tuples) to be promoted. Tuples are used for the “promote as” capability.
outputs (Sequence of str or tuple) – A Sequence of output names (or tuples) to be promoted. Tuples are used for the “promote as” capability.
src_indices (int or list of ints or tuple of ints or int ndarray or Iterable or None) – This argument applies only to promoted inputs. The global indices of the source variable to transfer data from. A value of None implies this input depends on all entries of source. Default is None. The shapes of the target and src_indices must match, and form of the entries within is determined by the value of ‘flat_src_indices’.
flat_src_indices (bool) – This argument applies only to promoted inputs. If True, each entry of src_indices is assumed to be an index into the flattened source. Otherwise each entry must be a tuple or list of size equal to the number of dimensions of the source.
src_shape (int or tuple) – Assumed shape of any connected source or higher level promoted input.

add_subsystem(name, subsys, promotes=None, promotes_inputs=None, promotes_outputs=None, min_procs=1, max_procs=None, proc_weight=1.0, proc_group=None)#

Add a subsystem.

Parameters:

name (str) – Name of the subsystem being added.
subsys (<System>) – An instantiated, but not-yet-set up system object.
promotes (iter of (str or tuple), optional) – A list of variable names specifying which subsystem variables to ‘promote’ up to this group. If an entry is a tuple of the form (old_name, new_name), this will rename the variable in the parent group.
promotes_inputs (iter of (str or tuple), optional) – A list of input variable names specifying which subsystem input variables to ‘promote’ up to this group. If an entry is a tuple of the form (old_name, new_name), this will rename the variable in the parent group.
promotes_outputs (iter of (str or tuple), optional) – A list of output variable names specifying which subsystem output variables to ‘promote’ up to this group. If an entry is a tuple of the form (old_name, new_name), this will rename the variable in the parent group.
min_procs (int) – Minimum number of MPI processes usable by the subsystem. Defaults to 1.
max_procs (int or None) – Maximum number of MPI processes usable by the subsystem. A value of None (the default) indicates there is no maximum limit.
proc_weight (float) – Weight given to the subsystem when allocating available MPI processes to all subsystems. Default is 1.0.
proc_group (str or None) – Name of a processor group such that any system with that processor group name within the same parent group will be allocated on the same mpi process(es). If this is not None, then any other systems sharing the same proc_group must have identical values of min_procs, max_procs, and proc_weight or an exception will be raised.

Returns:

The subsystem that was passed in. This is returned to enable users to instantiate and add a subsystem at the same time, and get the reference back.

Return type:

<System>

add_recorder(recorder, recurse=False)#

Add a recorder to the system.

Parameters:

recorder (<CaseRecorder>) – A recorder instance.
recurse (bool) – Flag indicating if the recorder should be added to all the subsystems.

connect(src_name, tgt_name, src_indices=None, flat_src_indices=None)#

Connect source src_name to target tgt_name in this namespace.

Parameters:

src_name (str) – Name of the source variable to connect.
tgt_name (str or [str, ] or (str, )) – Name of the target variable(s) to connect.
src_indices (int or list of ints or tuple of ints or int ndarray or Iterable or None) – The global indices of the source variable to transfer data from. The shapes of the target and src_indices must match, and form of the entries within is determined by the value of ‘flat_src_indices’.
flat_src_indices (bool) – If True, each entry of src_indices is assumed to be an index into the flattened source. Otherwise it must be a tuple or list of size equal to the number of dimensions of the source.

set_order(new_order)#

Specify a new execution order for subsystems in this group.

Parameters:: new_order (list of str) – List of system names in desired new execution order.

run_linearize(sub_do_ln=True, driver=None)#

Compute jacobian / factorization.

This calls _linearize, but with the model assumed to be in an unscaled state.

Parameters:

sub_do_ln (bool) – Flag indicating if the children should call linearize on their linear solvers.
driver (Driver or None) – If this system is the top level system and approx derivatives have not been initialized, the driver for this model must be supplied in order to properly initialize the approximations.

guess_nonlinear(inputs, outputs, residuals, discrete_inputs=None, discrete_outputs=None)#

Provide initial guess for states.

Override this method to set the initial guess for states.

Parameters:

inputs (Vector) – Unscaled, dimensional input variables read via inputs[key].
outputs (Vector) – Unscaled, dimensional output variables read via outputs[key].
residuals (Vector) – Unscaled, dimensional residuals written to via residuals[key].
discrete_inputs (dict or None) – If not None, dict containing discrete input values.
discrete_outputs (dict or None) – If not None, dict containing discrete output values.

approx_totals(method='fd', step=None, form=None, step_calc=None)#

Approximate derivatives for a Group using the specified approximation method.

Parameters:

method (str) – The type of approximation that should be used. Valid options include: ‘fd’: Finite Difference, ‘cs’: Complex Step.
step (float) – Step size for approximation. Defaults to None, in which case, the approximation method provides its default value.
form (str) – Form for finite difference, can be ‘forward’, ‘backward’, or ‘central’. Defaults to None, in which case, the approximation method provides its default value.
step_calc (str) – Step type for computing the size of the finite difference step. It can be ‘abs’ for absolute, ‘rel_avg’ for a size relative to the absolute value of the vector input, or ‘rel_element’ for a size relative to each value in the vector input. In addition, it can be ‘rel_legacy’ for a size relative to the norm of the vector. For backwards compatibilty, it can be ‘rel’, which is now equivalent to ‘rel_avg’. Defaults to None, in which case the approximation method provides its default value.

compute_sys_graph(comps_only=False, add_edge_info=True)#

Compute a dependency graph for subsystems in this group.

Variable connection information is stored in each edge of the system graph if comps_only is True and add_edge_info is True.

Parameters:

comps_only (bool (False)) – If True, return a graph of all components within this group or any of its descendants. No sub-groups will be included. Otherwise, a graph containing only direct children (both Components and Groups) of this group will be returned.
add_edge_info (bool (True)) – If True and comps_only is also True, store variable connection information in each edge of the system graph.

Returns:

A directed graph containing names of subsystems and their connections.

Return type:

DiGraph

property model_options#

Get the model options from self._problem_meta.

The user may change the contents of model_options to impact values sent to subsystems of this Group.

Returns:: The model options metadata provided by the associated Problem object.
Return type:: dict

get_design_vars(recurse=True, get_sizes=True, use_prom_ivc=True)#

Get the DesignVariable settings from this system.

Retrieve all design variable settings from the system and, if recurse is True, all of its subsystems.

Parameters:

recurse (bool) – If True, recurse through the subsystems and return the path of all design vars relative to the this Group.
get_sizes (bool, optional) – If True, compute the size of each design variable.
use_prom_ivc (bool) – Use promoted names for inputs, else convert to absolute source names.

Returns:

The design variables defined in the current system and, if recurse=True, its subsystems.

Return type:

dict

get_responses(recurse=True, get_sizes=True, use_prom_ivc=False)#

Get the response variable settings from this system.

Retrieve all response variable settings from the system as a dict, keyed by either absolute variable name, promoted name, or alias name, depending on the value of use_prom_ivc and whether the original key was a promoted output, promoted input, or an alias.

Parameters:

recurse (bool, optional) – If True, recurse through the subsystems and return the path of all responses relative to the this system.
get_sizes (bool, optional) – If True, compute the size of each response.
use_prom_ivc (bool) – Translate ivc names to their promoted input names.

Returns:

The responses defined in the current system and, if recurse=True, its subsystems.

Return type:

dict

name = ''#

pathname = None#

options#

recording_options#

iter_count = 0#

iter_count_apply = 0#

iter_count_without_approx = 0#

cite = ''#

matrix_free#

under_complex_step = False#

under_finite_difference = False#

property comm#

Return the wrapped MPI communicator object for the system.

Returns:: Wrapped MPI communicator object.
Return type:: DebugComm

property under_approx#

Return True if under complex step or finite difference.

Returns:: True if under CS or FD.
Return type:: bool

property msginfo#

Our instance pathname, if available, or our class name. For use in error messages.

Returns:: Either our instance pathname or class name.
Return type:: str

abs_meta_iter(iotype, local=True, cont=True, discrete=False)#

Iterate over absolute variable names and their metadata for this System.

By setting appropriate values for ‘cont’ and ‘discrete’, yielded variable names can be continuous only, discrete only, or both.

Parameters:

iotype (str) – Either ‘input’ or ‘output’.
local (bool) – If True, include only names of local variables. Default is True.
cont (bool) – If True, include names of continuous variables. Default is True.
discrete (bool) – If True, include names of discrete variables. Default is False.

Yields:

str, dict

set_output_solver_options(name, lower=_UNDEFINED, upper=_UNDEFINED, ref=_UNDEFINED, ref0=_UNDEFINED, res_ref=_UNDEFINED)#

Set solver output options.

Allows the user to set output solver options after the output has been defined and metadata set using the add_ouput method.

Parameters:

name (str) – Name of the variable in this system’s namespace.
lower (float or list or tuple or ndarray or None) – Lower bound(s) in user-defined units. It can be (1) a float, (2) an array_like consistent with the shape arg (if given), or (3) an array_like matching the shape of val, if val is array_like. A value of None means this output has no lower bound. Default is None.
upper (float or list or tuple or ndarray or None) – Upper bound(s) in user-defined units. It can be (1) a float, (2) an array_like consistent with the shape arg (if given), or (3) an array_like matching the shape of val, if val is array_like. A value of None means this output has no upper bound. Default is None.
ref (float) – Scaling parameter. The value in the user-defined units of this output variable when the scaled value is 1. Default is 1.
ref0 (float) – Scaling parameter. The value in the user-defined units of this output variable when the scaled value is 0. Default is 0.
res_ref (float) – Scaling parameter. The value in the user-defined res_units of this output’s residual when the scaled value is 1. Default is None, which means residual scaling matches output scaling.

set_design_var_options(name, lower=_UNDEFINED, upper=_UNDEFINED, scaler=_UNDEFINED, adder=_UNDEFINED, ref=_UNDEFINED, ref0=_UNDEFINED)#

Set options for design vars in the model.

Can be used to set the options outside of setting them when calling add_design_var

Parameters:

name (str) – Name of the variable in this system’s namespace.
lower (float or ndarray, optional) – Lower boundary for the input.
upper (upper or ndarray, optional) – Upper boundary for the input.
scaler (float or ndarray, optional) – Value to multiply the model value to get the scaled value for the driver. scaler is second in precedence. adder and scaler are an alterantive to using ref and ref0.
adder (float or ndarray, optional) – Value to add to the model value to get the scaled value for the driver. adder is first in precedence. adder and scaler are an alterantive to using ref and ref0.
ref (float or ndarray, optional) – Value of design var that scales to 1.0 in the driver.
ref0 (float or ndarray, optional) – Value of design var that scales to 0.0 in the driver.

set_constraint_options(name, ref=_UNDEFINED, ref0=_UNDEFINED, equals=_UNDEFINED, lower=_UNDEFINED, upper=_UNDEFINED, adder=_UNDEFINED, scaler=_UNDEFINED, alias=_UNDEFINED)#

Set options for constraints in the model.

Can be used to set options that were set using add_constraint.

Parameters:

name (str) – Name of the response variable in the system, or alias if given.
ref (float or ndarray, optional) – Value of response variable that scales to 1.0 in the driver.
ref0 (float or ndarray, optional) – Value of response variable that scales to 0.0 in the driver.
equals (float or ndarray, optional) – Equality constraint value for the variable.
lower (float or ndarray, optional) – Lower boundary for the variable.
upper (float or ndarray, optional) – Upper boundary for the variable.
adder (float or ndarray, optional) – Value to add to the model value to get the scaled value for the driver. adder is first in precedence. adder and scaler are an alterantive to using ref and ref0.
scaler (float or ndarray, optional) – Value to multiply the model value to get the scaled value for the driver. scaler is second in precedence. adder and scaler are an alterantive to using ref and ref0.
alias (str, optional) – Alias for this response. Necessary when adding multiple constraints on different indices or slices of a single variable.

set_objective_options(name, ref=_UNDEFINED, ref0=_UNDEFINED, adder=_UNDEFINED, scaler=_UNDEFINED, alias=_UNDEFINED)#

Set options for objectives in the model.

Can be used to set options after they have been set by add_objective.

Parameters:

name (str) – Name of the response variable in the system, or alias if given.
ref (float or ndarray, optional) – Value of response variable that scales to 1.0 in the driver.
ref0 (float or ndarray, optional) – Value of response variable that scales to 0.0 in the driver.
adder (float or ndarray, optional) – Value to add to the model value to get the scaled value for the driver. adder is first in precedence. adder and scaler are an alterantive to using ref and ref0.
scaler (float or ndarray, optional) – Value to multiply the model value to get the scaled value for the driver. scaler is second in precedence. adder and scaler are an alterantive to using ref and ref0.
alias (str) – Alias for this response. Used to disambiguate variable names when adding multiple objectives on different indices or slices of a single variable. Deprecated.

get_source(name)#

Return the source variable connected to the given named variable.

The name can be a promoted name or an absolute name. If the given variable is an input, the absolute name of the connected source will be returned. If the given variable itself is a source, its own absolute name will be returned.

Parameters:: name (str) – Absolute or promoted name of the variable.
Returns:: The absolute name of the source variable.
Return type:: str

use_fixed_coloring(coloring=STD_COLORING_FNAME(), recurse=True)#

Use a precomputed coloring for this System.

Parameters:

coloring (str) – A coloring filename. If no arg is passed, filename will be determined automatically.
recurse (bool) – If True, set fixed coloring in all subsystems that declare a coloring. Ignored if a specific coloring is passed in.

declare_coloring(wrt=_DEFAULT_COLORING_META['wrt_patterns'], method=_DEFAULT_COLORING_META['method'], form=None, step=None, per_instance=_DEFAULT_COLORING_META['per_instance'], num_full_jacs=_DEFAULT_COLORING_META['num_full_jacs'], tol=_DEFAULT_COLORING_META['tol'], orders=_DEFAULT_COLORING_META['orders'], perturb_size=_DEFAULT_COLORING_META['perturb_size'], min_improve_pct=_DEFAULT_COLORING_META['min_improve_pct'], show_summary=_DEFAULT_COLORING_META['show_summary'], show_sparsity=_DEFAULT_COLORING_META['show_sparsity'])#

Set options for deriv coloring of a set of wrt vars matching the given pattern(s).

Parameters:

wrt (str or list of str) – The name or names of the variables that derivatives are taken with respect to. This can contain input names, output names, or glob patterns.
method (str) – Method used to compute derivative: “fd” for finite difference, “cs” for complex step.
form (str) – Finite difference form, can be “forward”, “central”, or “backward”. Leave undeclared to keep unchanged from previous or default value.
step (float) – Step size for finite difference. Leave undeclared to keep unchanged from previous or default value.
per_instance (bool) – If True, a separate coloring will be generated for each instance of a given class. Otherwise, only one coloring for a given class will be generated and all instances of that class will use it.
num_full_jacs (int) – Number of times to repeat partial jacobian computation when computing sparsity.
tol (float) – Tolerance used to determine if an array entry is nonzero during sparsity determination.
orders (int) – Number of orders above and below the tolerance to check during the tolerance sweep.
perturb_size (float) – Size of input/output perturbation during generation of sparsity.
min_improve_pct (float) – If coloring does not improve (decrease) the number of solves more than the given percentage, coloring will not be used.
show_summary (bool) – If True, display summary information after generating coloring.
show_sparsity (bool) – If True, plot sparsity with coloring info after generating coloring.

uses_approx()#

Return True if the system uses approximations to compute derivatives.

Returns:: True if the system uses approximations to compute derivatives, False otherwise.
Return type:: bool

compute_sparsity(direction=None, num_iters=2, perturb_size=1e-09)#

Compute the sparsity of the partial jacobian.

Parameters:

direction (str) – Compute derivatives in fwd or rev mode, or whichever is based based on input and output sizes if value is None. Note that only fwd is possible when using finite difference.
num_iters (int) – Number of times to compute the full jacobian.
perturb_size (float) – Size of relative perturbation. If base value is 0.0, perturbation is absolute.

Returns:

coo_matrix – The sparsity matrix.
dict – Metadata about the sparsity computation.

subjac_sparsity_iter(sparsity, wrt_matches=None)#

Iterate over sparsity for each subjac in the jacobian.

Parameters:

sparsity (coo_matrix) – Sparsity matrix to use.
wrt_matches (set or None) – Only include row vars that are contained in this set.

Yields:

str – Name of ‘of’ variable.
str – Name of ‘wrt’ variable.
ndarray – Row indices of the non-zero elements local to the subjac.
ndarray – Column indices of the non-zero elements local to the subjac.
tuple – Shape of the subjac.

sparsity_matches_fd(direction=None, outstream=sys.stdout)#

Compare the sparsity computed by this system vs. the sparsity computed using fd.

Note that some systems use fd to compute their sparsity, so no difference will ever be found even if the sparsity is somehow incorrect.

Parameters:

direction (str or None) – Compute derivatives in fwd or rev mode, or whichever is based based on input and output sizes if value is None. Note that only fwd is possible when using finite difference.
outstream (file-like) – Stream where output will be written. If None, no output will be written. The output is a text visualization of the sparsity difference.

Returns:

True if they match, False otherwise.

Return type:

bool

get_coloring_fname(mode)#

Return the full pathname to a coloring file.

Parameters:: mode (str) – The type of coloring file desired. Must be either ‘input’ or ‘output’.
Returns:: Full pathname of the coloring file.
Return type:: pathlib.Path

get_nonlinear_vectors()#

Return the inputs, outputs, and residuals vectors.

Returns:: Yields the inputs, outputs, and residuals nonlinear vectors.
Return type:: (inputs, outputs, residuals)

get_linear_vectors()#

Return the linear inputs, outputs, and residuals vectors.

Returns:: (inputs, outputs, residuals) – Yields the linear inputs, outputs, and residuals vectors.
Return type:: tuple of <Vector> instances

property nonlinear_solver#: Get the nonlinear solver for this system.

property linear_solver#: Get the linear solver for this system.

set_solver_print(level=2, depth=1e+99, type_='all', debug_print=None)#

Control printing for solvers and subsolvers in the model.

Parameters:

level (int or None) – Iprint level. Set to 2 to print residuals each iteration; set to 1 to print just the iteration totals; set to 0 to disable all printing except for failures, and set to -1 to disable all printing including failures. A value of None will leave solving printing unchanged, which is useful when using this method to enable or disable debug printing only.
depth (int) – How deep to recurse. For example, you can set this to 0 if you only want to print the top level linear and nonlinear solver messages. Default prints everything.
type (str) – Type of solver to set: ‘LN’ for linear, ‘NL’ for nonlinear, or ‘all’ for all.
debug_print (bool or None) – If None, leave solver debug printing unchanged, otherwise turn it on or off depending on whether debug_print is True or False. Note debug_print is only applied to nonlinear solvers.

system_iter(include_self=False, recurse=True, typ=None, depth_first=False)#

Yield a generator of local subsystems of this system.

Parameters:

include_self (bool) – If True, include this system in the iteration.
recurse (bool) – If True, iterate over the whole tree under this system.
typ (type) – If not None, only yield Systems that match that are instances of the given type.
depth_first (bool) – If recurse is True, this specifies whether subsystems are returned in depth-first order (if True) or bredth-first order (if False).

Yields:

type or None

add_design_var(name, lower=None, upper=None, ref=None, ref0=None, indices=None, adder=None, scaler=None, units=None, parallel_deriv_color=None, cache_linear_solution=False, flat_indices=False)#

Add a design variable to this system.

Parameters:

name (str) – Promoted name of the design variable in the system.
lower (float or ndarray, optional) – Lower boundary for the input.
upper (upper or ndarray, optional) – Upper boundary for the input.
ref (float or ndarray, optional) – Value of design var that scales to 1.0 in the driver.
ref0 (float or ndarray, optional) – Value of design var that scales to 0.0 in the driver.
indices (iter of int, optional) – If an input is an array, these indicate which entries are of interest for this particular design variable. These may be positive or negative integers.
adder (float or ndarray, optional) – Value to add to the model value to get the scaled value for the driver. adder is first in precedence. adder and scaler are an alterantive to using ref and ref0.
scaler (float or ndarray, optional) – Value to multiply the model value to get the scaled value for the driver. scaler is second in precedence. adder and scaler are an alterantive to using ref and ref0.
units (str, optional) – Units to convert to before applying scaling.
parallel_deriv_color (str) – If specified, this design var will be grouped for parallel derivative calculations with other variables sharing the same parallel_deriv_color.
cache_linear_solution (bool) – If True, store the linear solution vectors for this variable so they can be used to start the next linear solution with an initial guess equal to the solution from the previous linear solve.
flat_indices (bool) – If True, interpret specified indices as being indices into a flat source array.

Notes

The response can be scaled using ref and ref0. The argument ref0 represents the physical value when the scaled value is 0. The argument ref represents the physical value when the scaled value is 1.

add_response(name, type_, lower=None, upper=None, equals=None, ref=None, ref0=None, indices=None, index=None, units=None, adder=None, scaler=None, linear=False, parallel_deriv_color=None, cache_linear_solution=False, flat_indices=None, alias=None)#

Add a response variable to this system.

Parameters:

name (str) – Promoted name of the response variable in the system.
type (str) – The type of response. Supported values are ‘con’ and ‘obj’.
lower (float or ndarray, optional) – Lower boundary for the variable.
upper (upper or ndarray, optional) – Upper boundary for the variable.
equals (equals or ndarray, optional) – Equality constraint value for the variable.
ref (float or ndarray, optional) – Value of response variable that scales to 1.0 in the driver.
ref0 (upper or ndarray, optional) – Value of response variable that scales to 0.0 in the driver.
indices (sequence of int, optional) – If variable is an array, these indicate which entries are of interest for this particular response.
index (int, optional) – If variable is an array, this indicates which entry is of interest for this particular response.
units (str, optional) – Units to convert to before applying scaling.
adder (float or ndarray, optional) – Value to add to the model value to get the scaled value for the driver. adder is first in precedence. adder and scaler are an alterantive to using ref and ref0.
scaler (float or ndarray, optional) – Value to multiply the model value to get the scaled value for the driver. scaler is second in precedence. adder and scaler are an alterantive to using ref and ref0.
linear (bool) – Set to True if constraint is linear. Default is False.
parallel_deriv_color (str) – If specified, this design var will be grouped for parallel derivative calculations with other variables sharing the same parallel_deriv_color.
cache_linear_solution (bool) – If True, store the linear solution vectors for this variable so they can be used to start the next linear solution with an initial guess equal to the solution from the previous linear solve.
flat_indices (bool) – If True, interpret specified indices as being indices into a flat source array.
alias (str or None) – Alias for this response. Necessary when adding multiple responses on different indices of the same variable.

add_constraint(name, lower=None, upper=None, equals=None, ref=None, ref0=None, adder=None, scaler=None, units=None, indices=None, linear=False, parallel_deriv_color=None, cache_linear_solution=False, flat_indices=False, alias=None)#

Add a constraint variable to this system.

Parameters:

name (str) – Name of the response variable in the system.
lower (float or ndarray, optional) – Lower boundary for the variable.
upper (float or ndarray, optional) – Upper boundary for the variable.
equals (float or ndarray, optional) – Equality constraint value for the variable.
ref (float or ndarray, optional) – Value of response variable that scales to 1.0 in the driver.
ref0 (float or ndarray, optional) – Value of response variable that scales to 0.0 in the driver.
adder (float or ndarray, optional) – Value to add to the model value to get the scaled value for the driver. adder is first in precedence. adder and scaler are an alterantive to using ref and ref0.
scaler (float or ndarray, optional) – Value to multiply the model value to get the scaled value for the driver. scaler is second in precedence. adder and scaler are an alternative to using ref and ref0.
units (str, optional) – Units to convert to before applying scaling.
indices (sequence of int, optional) – If variable is an array, these indicate which entries are of interest for this particular response. These may be positive or negative integers.
linear (bool) – Set to True if constraint is linear. Default is False.
parallel_deriv_color (str) – If specified, this design var will be grouped for parallel derivative calculations with other variables sharing the same parallel_deriv_color.
cache_linear_solution (bool) – If True, store the linear solution vectors for this variable so they can be used to start the next linear solution with an initial guess equal to the solution from the previous linear solve.
flat_indices (bool) – If True, interpret specified indices as being indices into a flat source array.
alias (str) – Alias for this response. Necessary when adding multiple constraints on different indices or slices of a single variable.

Notes

add_objective(name, ref=None, ref0=None, index=None, units=None, adder=None, scaler=None, parallel_deriv_color=None, cache_linear_solution=False, flat_indices=False, alias=None)#

Add a response variable to this system.

Parameters:

name (str) – Name of the response variable in the system.
ref (float or ndarray, optional) – Value of response variable that scales to 1.0 in the driver.
ref0 (float or ndarray, optional) – Value of response variable that scales to 0.0 in the driver.
index (int, optional) – If variable is an array, this indicates which entry is of interest for this particular response. This may be a positive or negative integer.
units (str, optional) – Units to convert to before applying scaling.
adder (float or ndarray, optional) – Value to add to the model value to get the scaled value for the driver. adder is first in precedence. adder and scaler are an alterantive to using ref and ref0.
scaler (float or ndarray, optional) – Value to multiply the model value to get the scaled value for the driver. scaler is second in precedence. adder and scaler are an alterantive to using ref and ref0.
parallel_deriv_color (str) – If specified, this design var will be grouped for parallel derivative calculations with other variables sharing the same parallel_deriv_color.
cache_linear_solution (bool) – If True, store the linear solution vectors for this variable so they can be used to start the next linear solution with an initial guess equal to the solution from the previous linear solve.
flat_indices (bool) – If True, interpret specified indices as being indices into a flat source array.
alias (str) – Alias for this response. Necessary when adding multiple objectives on different indices or slices of a single variable.

Notes

The objective can be scaled using scaler and adder, where

\[x_{scaled} = scaler(x + adder)\]

or through the use of ref/ref0, which map to scaler and adder through the equations:

\[ \begin{align}\begin{aligned}0 = scaler(ref_0 + adder)\\1 = scaler(ref + adder)\end{aligned}\end{align} \]

which results in:

\[ \begin{align}\begin{aligned}adder = -ref_0\\scaler = \frac{1}{ref + adder}\end{aligned}\end{align} \]

get_constraints(recurse=True, get_sizes=True, use_prom_ivc=True)#

Get the Constraint settings from this system.

Retrieve the constraint settings for the current system as a dict, keyed by variable name.

Parameters:

recurse (bool, optional) – If True, recurse through the subsystems and return the path of all constraints relative to the this system.
get_sizes (bool, optional) – If True, compute the size of each constraint.
use_prom_ivc (bool) – Translate ivc names to their promoted input names.

Returns:

The constraints defined in the current system.

Return type:

dict

get_objectives(recurse=True, get_sizes=True, use_prom_ivc=True)#

Get the Objective settings from this system.

Retrieve all objectives settings from the system as a dict, keyed by variable name.

Parameters:

recurse (bool, optional) – If True, recurse through the subsystems and return the path of all objective relative to the this system.
get_sizes (bool, optional) – If True, compute the size of each objective.
use_prom_ivc (bool) – Translate ivc names to their promoted input names.

Returns:

The objectives defined in the current system.

Return type:

dict

run_apply_nonlinear()#

Compute residuals.

This calls _apply_nonlinear, but with the model assumed to be in an unscaled state.

get_io_metadata(iotypes=('input', 'output'), metadata_keys=None, includes=None, excludes=None, is_indep_var=None, is_design_var=None, tags=None, get_remote=False, rank=None, return_rel_names=True)#

Retrieve metadata for a filtered list of variables.

Parameters:

iotypes (str or iter of str) – Will contain either ‘input’, ‘output’, or both. Defaults to both.
metadata_keys (iter of str or None) – Names of metadata entries to be retrieved or None, meaning retrieve all available ‘allprocs’ metadata. If ‘val’ or ‘src_indices’ are required, their keys must be provided explicitly since they are not found in the ‘allprocs’ metadata and must be retrieved from local metadata located in each process.
includes (str, iter of str or None) – Collection of glob patterns for pathnames of variables to include. Default is None, which includes all variables.
excludes (str, iter of str or None) – Collection of glob patterns for pathnames of variables to exclude. Default is None.
is_indep_var (bool or None) – If None (the default), do no additional filtering of the inputs. If True, list only inputs connected to an output tagged openmdao:indep_var. If False, list only inputs _not_ connected to outputs tagged openmdao:indep_var.
is_design_var (bool or None) – If None (the default), do no additional filtering of the inputs. If True, list only inputs connected to outputs that are driver design variables. If False, list only inputs _not_ connected to outputs that are driver design variables.
tags (str or iter of strs) – User defined tags that can be used to filter what gets listed. Only inputs with the given tags will be listed. Default is None, which means there will be no filtering based on tags.
get_remote (bool) – If True, retrieve variables from other MPI processes as well.
rank (int or None) – If None, and get_remote is True, retrieve values from all MPI process to all other MPI processes. Otherwise, if get_remote is True, retrieve values from all MPI processes only to the specified rank.
return_rel_names (bool) – If True, the names returned will be relative to the scope of this System. Otherwise they will be absolute names.

Returns:

A dict of metadata keyed on name, where name is either absolute or relative based on the value of the return_rel_names arg, and metadata is a dict containing entries based on the value of the metadata_keys arg. Every metadata dict will always contain two entries, ‘prom_name’ and ‘discrete’, to indicate a given variable’s promoted name and whether or not it is discrete.

Return type:

dict

list_vars(val=True, prom_name=True, residuals=False, residuals_tol=None, units=False, shape=False, global_shape=False, bounds=False, scaling=False, desc=False, print_arrays=False, tags=None, print_tags=False, includes=None, excludes=None, is_indep_var=None, is_design_var=None, all_procs=False, list_autoivcs=False, out_stream=_DEFAULT_OUT_STREAM, print_min=False, print_max=False, print_mean=False, return_format='list')#

Write a list of inputs and outputs sorted by component in execution order.

Parameters:

val (bool, optional) – When True, display output values. Default is True.
prom_name (bool, optional) – When True, display the promoted name of the variable. Default is True.
residuals (bool, optional) – When True, display residual values. Default is False.
residuals_tol (float, optional) – If set, limits the output of list_outputs to only variables where the norm of the resids array is greater than the given ‘residuals_tol’. Default is None.
units (bool, optional) – When True, display units. Default is False.
shape (bool, optional) – When True, display/return the shape of the value. Default is False.
global_shape (bool, optional) – When True, display/return the global shape of the value. Default is False.
bounds (bool, optional) – When True, display/return bounds (lower and upper). Default is False.
scaling (bool, optional) – When True, display/return scaling (ref, ref0, and res_ref). Default is False.
desc (bool, optional) – When True, display/return description. Default is False.
print_arrays (bool, optional) – When False, in the columnar display, just display norm of any ndarrays with size > 1. The norm is surrounded by vertical bars to indicate that it is a norm. When True, also display full values of the ndarray below the row. Format is affected by the values set with numpy.set_printoptions Default is False.
tags (str or list of strs) – User defined tags that can be used to filter what gets listed. Only outputs with the given tags will be listed. Default is None, which means there will be no filtering based on tags.
print_tags (bool) – When true, display tags in the columnar display.
includes (None, str, or iter of str) – Collection of glob patterns for pathnames of variables to include. Default is None, which includes all output variables.
excludes (None, str, or iter of str) – Collection of glob patterns for pathnames of variables to exclude. Default is None.
is_indep_var (bool or None) – If None (the default), do no additional filtering of the inputs. If True, list only outputs tagged openmdao:indep_var. If False, list only outputs that are _not_ tagged openmdao:indep_var.
is_design_var (bool or None) – If None (the default), do no additional filtering of the inputs. If True, list only inputs connected to outputs that are driver design variables. If False, list only inputs _not_ connected to outputs that are driver design variables.
all_procs (bool, optional) – When True, display output on all processors. Default is False.
list_autoivcs (bool) – If True, include auto_ivc outputs in the listing. Defaults to False.
out_stream (file-like) – Where to send human readable output. Default is sys.stdout. Set to None to suppress.
print_min (bool) – When true, if the output value is an array, print its smallest value.
print_max (bool) – When true, if the output value is an array, print its largest value.
print_mean (bool) – When true, if the output value is an array, print its mean value.
return_format (str) – Indicates the desired format of the return value. Can have value of ‘list’ or ‘dict’. If ‘list’, the return value is a list of (name, metadata) tuples. if ‘dict’, the return value is a dictionary mapping {name: metadata}.

Returns:

list of (name, metadata) or dict of {name – List or dict of output names and other optional information about those outputs.

Return type:

metadata``}``

list_inputs(val=True, prom_name=True, units=False, shape=False, global_shape=False, desc=False, hierarchical=True, print_arrays=False, tags=None, print_tags=False, includes=None, excludes=None, is_indep_var=None, is_design_var=None, all_procs=False, out_stream=_DEFAULT_OUT_STREAM, print_min=False, print_max=False, print_mean=False, return_format='list')#

Write a list of input names and other optional information to a specified stream.

Parameters:

val (bool, optional) – When True, display/return input values. Default is True.
prom_name (bool, optional) – When True, display/return the promoted name of the variable. Default is True.
units (bool, optional) – When True, display/return units. Default is False.
shape (bool, optional) – When True, display/return the shape of the value. Default is False.
global_shape (bool, optional) – When True, display/return the global shape of the value. Default is False.
desc (bool, optional) – When True, display/return description. Default is False.
hierarchical (bool, optional) – When True, human readable output shows variables in hierarchical format.
print_arrays (bool, optional) – When False, in the columnar display, just display norm of any ndarrays with size > 1. The norm is surrounded by vertical bars to indicate that it is a norm. When True, also display full values of the ndarray below the row. Format is affected by the values set with numpy.set_printoptions Default is False.
tags (str or list of strs) – User defined tags that can be used to filter what gets listed. Only inputs with the given tags will be listed. Default is None, which means there will be no filtering based on tags.
print_tags (bool) – When true, display tags in the columnar display.
includes (None, str, or iter of str) – Collection of glob patterns for pathnames of variables to include. Default is None, which includes all input variables.
excludes (None, str, or iter of str) – Collection of glob patterns for pathnames of variables to exclude. Default is None.
is_indep_var (bool or None) – If None (the default), do no additional filtering of the inputs. If True, list only inputs connected to an output tagged openmdao:indep_var. If False, list only inputs _not_ connected to outputs tagged openmdao:indep_var.
is_design_var (bool or None) – If None (the default), do no additional filtering of the inputs. If True, list only inputs connected to outputs that are driver design variables. If False, list only inputs _not_ connected to outputs that are driver design variables.
all_procs (bool, optional) – When True, display output on all ranks. Default is False, which will display output only from rank 0.
out_stream (file-like object) – Where to send human readable output. Default is sys.stdout. Set to None to suppress.
print_min (bool) – When true, if the input value is an array, print its smallest value.
print_max (bool) – When true, if the input value is an array, print its largest value.
print_mean (bool) – When true, if the input value is an array, print its mean value.
return_format (str) – Indicates the desired format of the return value. Can have value of ‘list’ or ‘dict’. If ‘list’, the return value is a list of (name, metadata) tuples. if ‘dict’, the return value is a dictionary mapping {name: metadata}.

Returns:

list of (name, metadata) or dict of {name – List or dict of input names and other optional information about those inputs.

Return type:

metadata``}``

list_outputs(explicit=True, implicit=True, val=True, prom_name=True, residuals=False, residuals_tol=None, units=False, shape=False, global_shape=False, bounds=False, scaling=False, desc=False, hierarchical=True, print_arrays=False, tags=None, print_tags=False, includes=None, excludes=None, is_indep_var=None, is_design_var=None, all_procs=False, list_autoivcs=False, out_stream=_DEFAULT_OUT_STREAM, print_min=False, print_max=False, print_mean=False, return_format='list')#

Write a list of output names and other optional information to a specified stream.

Parameters:

explicit (bool, optional) – Include outputs from explicit components. Default is True.
implicit (bool, optional) – Include outputs from implicit components. Default is True.
val (bool, optional) – When True, display output values. Default is True.
prom_name (bool, optional) – When True, display the promoted name of the variable. Default is True.
residuals (bool, optional) – When True, display residual values. Default is False.
residuals_tol (float, optional) – If set, limits the output of list_outputs to only variables where the norm of the resids array is greater than the given ‘residuals_tol’. Default is None.
units (bool, optional) – When True, display units. Default is False.
shape (bool, optional) – When True, display/return the shape of the value. Default is False.
global_shape (bool, optional) – When True, display/return the global shape of the value. Default is False.
bounds (bool, optional) – When True, display/return bounds (lower and upper). Default is False.
scaling (bool, optional) – When True, display/return scaling (ref, ref0, and res_ref). Default is False.
desc (bool, optional) – When True, display/return description. Default is False.
hierarchical (bool, optional) – When True, human readable output shows variables in hierarchical format.
print_arrays (bool, optional) – When False, in the columnar display, just display norm of any ndarrays with size > 1. The norm is surrounded by vertical bars to indicate that it is a norm. When True, also display full values of the ndarray below the row. Format is affected by the values set with numpy.set_printoptions Default is False.
tags (str or list of strs) – User defined tags that can be used to filter what gets listed. Only outputs with the given tags will be listed. Default is None, which means there will be no filtering based on tags.
print_tags (bool) – When true, display tags in the columnar display.
includes (None, str, or iter of str) – Collection of glob patterns for pathnames of variables to include. Default is None, which includes all output variables.
excludes (None, str, or iter of str) – Collection of glob patterns for pathnames of variables to exclude. Default is None.
is_indep_var (bool or None) – If None (the default), do no additional filtering of the inputs. If True, list only outputs tagged openmdao:indep_var. If False, list only outputs that are _not_ tagged openmdao:indep_var.
is_design_var (bool or None) – If None (the default), do no additional filtering of the inputs. If True, list only inputs connected to outputs that are driver design variables. If False, list only inputs _not_ connected to outputs that are driver design variables.
all_procs (bool, optional) – When True, display output on all processors. Default is False.
list_autoivcs (bool) – If True, include auto_ivc outputs in the listing. Defaults to False.
out_stream (file-like) – Where to send human readable output. Default is sys.stdout. Set to None to suppress.
print_min (bool) – When true, if the output value is an array, print its smallest value.
print_max (bool) – When true, if the output value is an array, print its largest value.
print_mean (bool) – When true, if the output value is an array, print its mean value.
return_format (str) – Indicates the desired format of the return value. Can have value of ‘list’ or ‘dict’. If ‘list’, the return value is a list of (name, metadata) tuples. if ‘dict’, the return value is a dictionary mapping {name: metadata}.

Returns:

list of (name, metadata) or dict of {name – List or dict of output names and other optional information about those outputs.

Return type:

metadata``}``

list_options(include_default=True, include_solvers=True, out_stream=_DEFAULT_OUT_STREAM, return_format='list')#

Write a list of output names and other optional information to a specified stream.

Parameters:

include_default (bool) – When True, include the built-in openmdao system options. Default is True.
include_solvers (bool) – When True, include options from nonlinear_solver and linear_solver.
out_stream (file-like) – Where to send human readable output. Default is sys.stdout. Set to None to suppress.
return_format (str) – Indicates the desired format of the return value. Can have value of ‘list’ or ‘dict’. If ‘list’, the return value is a list of tuples of the form: (pathname, system options , nonlinear solver options, linear solver options) if ‘dict’, the return value is a dictionary with the pathname as key, and a dictionary as the value. The dictionary contains ‘options’, ‘nonlinear_solver’, and ‘linear_solver’ keys, each of which isa dictionary of options.

Returns:

List of tuples, one for each subsystem sorted by execution order. Each tuple contains the pathname string, a dictionary of system options, a dictionary of nonlinear solver options (only if include_solvers is True) or None, and a dictionary of nonlinear solver options (only if include_solvers is True) or None.

Return type:

list of tuple

run_solve_nonlinear()#

Compute outputs.

This calls _solve_nonlinear, but with the model assumed to be in an unscaled state.

run_apply_linear(mode, scope_out=None, scope_in=None)#

Compute jac-vec product.

This calls _apply_linear, but with the model assumed to be in an unscaled state.

Parameters:

mode (str) – ‘fwd’ or ‘rev’.
scope_out (set or None) – Set of absolute output names in the scope of this mat-vec product. If None, all are in the scope.
scope_in (set or None) – Set of absolute input names in the scope of this mat-vec product. If None, all are in the scope.

run_solve_linear(mode)#

Apply inverse jac product.

This calls _solve_linear, but with the model assumed to be in an unscaled state.

Parameters:: mode (str) – ‘fwd’ or ‘rev’.

check_config(logger)#

Perform optional error checks.

Parameters:: logger (object) – The object that manages logging output.

load_model_options()#

Load the relevant model options from Problem._metadata[‘model_options’].

This method examines each path filter and corresponding options in self._problem_meta[‘model_options’]. If this System’s pathname matches the given path filter, it will assume the value for each given option which it possesses.

record_iteration()#: Record an iteration of the current System.

get_reports_dir()#

Get the path to the directory where the report files should go.

If it doesn’t exist, it will be created.

Returns:: The path to the directory where reports should be written.
Return type:: str

get_outputs_dir(*subdirs, mkdir=False)#

Get the path under which all output files of this system are to be placed.

Parameters:

*subdirs (str) – Subdirectories nested under the relevant problem output directory. To create {prob_output_dir}/a/b one would pass system.get_outputs_dir(‘a’, ‘b’).
mkdir (bool) – If True, attempt to create this directory if it does not exist.

Returns:

The path of the outputs directory for the problem.

Return type:

pathlib.Path

cleanup()#: Clean up resources prior to exit.

get_val(name, units=None, indices=None, get_remote=False, rank=None, vec_name='nonlinear', kind=None, flat=False, from_src=True, copy=False)#

Get an output/input/residual variable.

Function is used if you want to specify display units.

Parameters:

name (str) – Promoted or relative variable name in the root system’s namespace.
units (str, optional) – Units to convert to before return.
indices (int or list of ints or tuple of ints or int ndarray or Iterable or None, optional) – Indices or slice to return.
get_remote (bool or None) – If True, retrieve the value even if it is on a remote process. Note that if the variable is remote on ANY process, this function must be called on EVERY process in the Problem’s MPI communicator. If False, only retrieve the value if it is on the current process, or only the part of the value that’s on the current process for a distributed variable. If None and the variable is remote or distributed, a RuntimeError will be raised.
rank (int or None) – If not None, only gather the value to this rank.
vec_name (str) – Name of the vector to use. Defaults to ‘nonlinear’.
kind (str or None) – Kind of variable (‘input’, ‘output’, or ‘residual’). If None, returned value will be either an input or output.
flat (bool) – If True, return the flattened version of the value.
from_src (bool) – If True, retrieve value of an input variable from its connected source.
copy (bool, optional) – If True, return a copy of the value. If False, return a reference to the value.

Returns:

The value of the requested output/input variable.

Return type:

object

set_val(name, val, units=None, indices=None)#

Set an input or output variable.

Parameters:

name (str) – Promoted or relative variable name in the system’s namespace.
val (object) – Value to assign to this variable.
units (str, optional) – Units of the value.
indices (int or list of ints or tuple of ints or int ndarray or Iterable or None, optional) – Indices or slice to set.

convert2units(name, val, units)#

Convert the given value to the specified units.

Parameters:

name (str) – Name of the variable.
val (float or ndarray of float) – The value of the variable.
units (str) – The units to convert to.

Returns:

The value converted to the specified units.

Return type:

float or ndarray of float

convert_from_units(name, val, units)#

Convert the given value from the specified units to those of the named variable.

Parameters:

name (str) – Name of the variable.
val (float or ndarray of float) – The value of the variable.
units (str) – The units to convert to.

Returns:

The value converted to the specified units.

Return type:

float or ndarray of float

convert_units(name, val, units_from, units_to)#

Wrap the utility convert_units and give a good error message.

Parameters:

name (str) – Name of the variable.
val (float or ndarray of float) – The value of the variable.
units_from (str) – The units to convert from.
units_to (str) – The units to convert to.

Returns:

The value converted to the specified units.

Return type:

float or ndarray of float

total_local_size(io)#

Return the total local size of the given variable.

Parameters:: io (str) – Either ‘input’ or ‘output’.
Returns:: The total local size of the given input or output vector.
Return type:: int

best_partial_deriv_direction()#

Return the best direction for partial deriv calculations based on input and output sizes.

Returns:: The best direction for derivative calculations, ‘fwd’ or ‘rev’.
Return type:: str

get_promotions(inprom=None, outprom=None)#

Return all promotions for the given promoted variable(s).

In other words, how and where did promotions occur to convert absolute variable names into the given promoted name(s) at the current System level.

Parameters:

inprom (str or None) – The promoted input variable name.
outprom (str or None) – The promoted output variable name.

Returns:

Dictionary keyed on system pathname containing input and/or output promotion lists for each System where promotions occurred to produce the given promoted variable(s).

Return type:

dict

load_case(case)#

Pull all input and output variables from a Case into this System.

Override this method if the System requires special handling when loading a case.

Parameters:: case (Case or dict) – A Case from a CaseReader, or a dictionary with key ‘inputs’ mapped to the output of problem.model.list_inputs and key ‘outputs’ mapped to the output of prob.model.list_outputs. Both list_inputs and list_outputs should be called with prom_name=True and return_format=’dict’.

comm_info_iter()#

Yield comm size for this system and all subsystems.

Yields:: tuple – A tuple of the form (abs_name, comm_size).

dist_size_iter(io, top_comm)#

Yield names and distributed ranges of all local and remote variables in this system.

Parameters:

io (str) – Either ‘input’ or ‘output’.
top_comm (MPI.Comm or None) – The top-level MPI communicator.

Yields:

tuple – A tuple of the form ((abs_name, rank), start, end).

get_var_dup_info(name, io)#

Return information about how the given variable is duplicated across MPI processes.

Parameters:

name (str) – Name of the variable.
io (str) – Either ‘input’ or ‘output’.

Returns:

A tuple of the form (is_duplicated, num_zeros, is_distributed).

Return type:

tuple

get_var_sizes(name, io)#

Return the sizes of the given variable on all procs.

Parameters:

name (str) – Name of the variable.
io (str) – Either ‘input’ or ‘output’.

Returns:

Array of sizes of the variable on all procs.

Return type:

ndarray

get_self_statics()#

Override this in derived classes if compute_primal references static values.

Do NOT include self._discrete_inputs in the returned tuple. Include things like self.options[‘opt_name’], etc., that are used in compute_primal but are assumed to be constant during derivative computation.

Return value MUST be a tuple. Don’t forget the trailing comma if tuple has only one item. Return value MUST be hashable.

The order of these values doesn’t matter. They are only checked (by computing their hash) to see if they have changed since the last time compute_primal was jitted, and if so, compute_primal will be re-jitted.

Returns:: Tuple containing all static values required by compute_primal.
Return type:: tuple

run_validation()#

Run validate method on all systems below this system.

The validate method on each system can be used to check any final input / output values after a run.

validate(inputs, outputs, discrete_inputs=None, discrete_outputs=None)#

Check any final input / output values after a run.

The model is assumed to be in an unscaled state. An inherited component may choose to either override this function or ignore it. Any errors or warnings raised in this method will be collected and all printed / raised together.

Parameters:

inputs (Vector) – Unscaled, dimensional input variables read via inputs[key].
outputs (Vector) – Unscaled, dimensional output variables read via outputs[key].
discrete_inputs (dict-like or None) – If not None, dict-like object containing discrete input values.
discrete_outputs (dict-like or None) – If not None, dict-like object containing discrete output values.

paroto.systems.mixing_reactor#

Classes#

Module Contents#

Parameters (in initialize)#

Inputs#

Outputs#

This Page